The analysis of the cause of the failure and the solution are as follows: (1) Whether the condensed water discharged from the trap has a large oil content, if so, check the leakage point in the unit and eliminate it, check whether the oil level of the compressor is too high, if so, reduce the oil level; (2 ) Whether the opening pressure of the minimum pressure valve is normal, if so, troubleshoot, and it is necessary to replace the valve; check whether the oil return pipe is blocked, if so, clean or replace the oil return pipe: (3) Replace the oil separator core.
[pdf] The choice of drill bit is critical for drilling into limestone. Carbide-tipped drill bits are generally recommended due to their hardness and ability to withstand abrasion. Diamond-tipped drill bits are even more effective for harder limestone varieties but are also more expensive.
[pdf] Rotary bits drill the formation using primarily two principles: 1. Rock removal by exceeding its shear strength and 2. Removal by exceeding the compressive strength. The broken rock is removed by rotary scraping or hydraulic cleaning. Either process can also contribute to the initial breakage. Most drilling. .
Diamonds embedded in a matrix have been used since the early Chinese dynasties; however, modern usage for mineral exploration.
[pdf] 
