When the inlet/unloader valve is open, the air enters the compressor screw element. The screw element works like a pump and it compressed the air. During this process, oil is injected in the element. The oil is there to cool the air, as the air gets very hot during compression.
[pdf] The DHV-G/A series features a permanent magnet variable frequency single-stage compression screw air compressor that delivers stable air pressure with no impact during startup. It boasts variable flow control and excellent alternating current power supply voltage adaptability.
[pdf] The analysis of the cause of the failure and the solution are as follows: (1) Whether the condensed water discharged from the trap has a large oil content, if so, check the leakage point in the unit and eliminate it, check whether the oil level of the compressor is too high, if so, reduce the oil level; (2 ) Whether the opening pressure of the minimum pressure valve is normal, if so, troubleshoot, and it is necessary to replace the valve; check whether the oil return pipe is blocked, if so, clean or replace the oil return pipe: (3) Replace the oil separator core.
[pdf] 
