Fill the reservoir with air tool oil or 10W equivalent for 9 lb and 15 lb class. Use rock drill oil for the 38 lb and 60 lb class tools. Check all nuts and bolts to ensure they are tight on the tool. Make sure retainer locks into place. Replace retainer and springs if worn.
[pdf] Fill the reservoir with air tool oil or 10W equivalent for 9 lb and 15 lb class. Use rock drill oil for the 38 lb and 60 lb class tools. Check all nuts and bolts to ensure they are tight on the tool. Make sure retainer locks into place. Replace retainer and springs if worn.
[pdf] Excess heat increases maintenance frequency. Mount a thermometer in the compressor room. Increase ventilation if room temperature exceeds operating limits. Inspect and remove/vacuum loose dust from inlet filters. Frequency depends on ambient dust load. Inspect and vacuum ambient side of coolers..
Excess heat increases maintenance frequency. Mount a thermometer in the compressor room. Increase ventilation if room temperature exceeds operating limits. Inspect and remove/vacuum loose dust from inlet filters. Frequency depends on ambient dust load. Inspect and vacuum ambient side of coolers..
Firstly, regularly replace the air filters and oil filters, keeping them clean to ensure the compressor operates smoothly. Secondly, check the quality and level of lubricating oil regularly to ensure the lubrication system functions properly, reducing wear and extending component life.
[pdf] 
