A floating production storage and offloading (FPSO) unit is a floating vessel used by the offshore oil and gas industry for the production and processing of hydrocarbons, and for the storage of oil. An FPSO vessel is designed to receive hydrocarbons produced by itself or from nearby platforms or subsea template, process them, and store oil until it can be offloaded onto a tanker or, less frequ. TypesFPSOs are classified into the following types. • Floating storage and offloading (FSO)• Floating production storage and. .
Oil has been produced from offshore locations since the late 1940s. Originally, all sat on the seabed, but as exploration moved to deeper waters and more distant locations in the 1970s, floating production. .
Oil produced from offshore can be transported to the either by pipeline or by tanker. When a tanker is chosen to transport the oil, it is necessary to accumulate oil in some form of storage t.
[pdf] 
A mud tank is a sizable storage container, typically with an open top. In the past, people called it a mud pit because it used to be just a pit dug out of the earth. It’s used to hold drilling mud. Mud tanks are constructed from welded-up steel plates and tubes. The bottom of the tank can either be square or cone. .
Drilling generates much heat from friction. Even small hand-held drills produce a lot of friction heat. Now imagine a drill many times larger and spinning with more. .
A mud tank is classified as either active or reserve. You can find many tanks in one oil rig. While the rig doesn’t use all the tanks at once, it does use several. An. .
Every part of an oil rig is essential. Mud tanks are no exception; they are needed to make your oil rig run like clockwork. Are you in the market for tanks and other. .
A mud tank is an open-top container, typically made of square steel tube and steel plate, to store on a . They are also called mud pits, as they were once simple pits in the earth.
[pdf] 
This is the tank from which drilling fluid is pumped downhole and to which drilling fluid returns from the hole is received. The route taken by the drilling fluid when circulating is called the active (circulating) system. At the start of circulation, the Mud Pumps are lined up on the Active Tank, and drilling fluid is. .
These are used for storing fluids according to requirements. Reserve mud is usually prepared or stored in these tanks or different fluids in preparation for. .
The Sand Traps are usually positioned below the shale shakers and act as settling pits for the drilling fluid after passing through the shale shakers. The. .
These tanks are more minor than active and reserve tanks. They are used for preparing “slugs” (high-density mud that is pumped into the drill string before tripping out of the hole) and pills to address particular situations (e.g. an LCM pill to control formation losses, a unique mix to improve drilling mud properties, etc.). .
The Trip Tank is a tall, narrow tank located near the flow line and used for accurately monitoring drill pipe displacement volumes while tripping pipe in or out of the hole. Active drilling mud from the Trip Tank is circulated across the hole, and valves in the flow line near the Bell Nipple are realigned to send the fluid returns back to the Trip .
[pdf] 