When you turn on the engine, the battery powers the pistons in the cylinder up and down. The pistons push the air through the cylinders, into a combustion chamber where it is compressed. Compression forces the molecules in the air to move faster, which naturally heats the air. Fuel is then injected into the hot,. .
While the above process occurs, additional fuel is delivered by the system. The fuel is pumped from the fuel tank, passing through filters, a higher pressurization pump,. .
During the ignition process, air is also pumped to the cylinders. On some engines, this air passes through a simple air cleaner en route.
[pdf] There is a wide selection of models including box and trailer type configurations with continuous duty outputs from 1.84 to 34 m3/min (65 to 1,200 cfm) and rated pressures from 7 to 24.5 bar (100 to 355 psi). A factory installed aftercooler option is available for most of the 7 bar compressors.
[pdf] Heat treatment for rock drilling tools typically involves processes such as annealing, normalizing, quenching, and tempering. These techniques greatly enhance the tool’s hardness, wear resistance, strength, and toughness, ensuring optimal performance even in demanding working conditions.
[pdf] 
