Firstly, check the pressure before and after the separation of the Kaishan air compressor, as well as whether there is any air leakage in the manual valve and the regulating solenoid valve 2SV; Then check for leaks in the gas pipeline, whether all butterfly valves are open, whether the intake regulator is working properly, whether solenoid valves 3SV and 8SV are leaking, and whether the pressure switch IPS needs to be readjusted.
[pdf] use caustic soda solution (Concentration 8-10%) Heat to 60℃ and soak the handpiece for 24 hours. cooler Use a high-pressure water gun (pressure>15MPa) to back-flush the copper tube. replacement All-oil sealing ring Avoid corrosion by residual cleaning agents.
[pdf] There is dirt stuck in the wind flap or other rotating parts 1. Send the minor repair station in time to remove or replace the necessary parts. 3. If you use the air duct to refuel, do not add too much fuel at a time, but you must work hard.
[pdf] 
