Before making any repairs, be sure the unit is unplugged and tank has no air. To remove the line and load cords from the pressure switch, the pressure switch cover will need to be removed. Use your Phillips head screwdriver to loosen the screw located either on the top or on the side of the cover.
[pdf] Firstly, check the pressure before and after the separation of the Kaishan air compressor, as well as whether there is any air leakage in the manual valve and the regulating solenoid valve 2SV; Then check for leaks in the gas pipeline, whether all butterfly valves are open, whether the intake regulator is working properly, whether solenoid valves 3SV and 8SV are leaking, and whether the pressure switch IPS needs to be readjusted.
[pdf] Should be in the mage-ohms (you need an isolation tester / high voltage ohm meter for this). Check the voltage when the compressor is running. If the voltage drop significantly when the compressor starts/runs, you have a bad connection somewhere. Check all relays, fuses and electrical connections.
[pdf] 
