There is dirt stuck in the wind flap or other rotating parts 1. Send the minor repair station in time to remove or replace the necessary parts. 3. If you use the air duct to refuel, do not add too much fuel at a time, but you must work hard.
[pdf] Firstly, check if the screw air compressor machine automatically stops working properly; Then check if the automatic switch and thermal relay are working, if they cause the cooling fan motor to stop, or if the exhaust temperature is too high or the pressure is too high, and if the motor voltage is normal.
[pdf] 
The top drive is one of the components of the drilling rig that is used to rotate the drill string during drilling, having 1000 horsepower, which rotates the shaft to which the drill string is attached. It decreases the amount of manual work and labor that is involved in the conventional drilling Kellysystem, hence,. .
The top drive has many advantages that help better its functions during the drilling involving safety and efficient way of drilling and are enlisted below: 1. In the top drive system, it is. .
The following list is the list of components that are involved in a tip drive system: 1. Elevator 2. Bail Assembly 3. Grabber Assembly 4. Saver Sub 5. Stabbing Valve 6. Tilt. .
As the rotation to the drill stem is provided by the top drive, in the top drive system, so the Kelly and the Kelly bushing is not required in this system. However; for the support of slip and weight of a drill stem and as an opening for lowering or raising of drill stem into the borehole, a rotary table, and a master bushing are installed in this . .
A top drive is a mechanical device on a that provides clockwise torque to the to drill a . It is an alternative to the and . It is located at the place below the traveling block and moves vertically up and down the derrick.
[pdf] 
