Kaishan 20 rock drill does not blow down the wind

There is dirt stuck in the wind flap or other rotating parts 1. Send the minor repair station in time to remove or replace the necessary parts. 3. If you use the air duct to refuel, do not add too much fuel at a time, but you must work hard. [pdf]

Screw air compressor safety valve has wind

Check the isolation of the motor windings. Should be in the mage-ohms (you need an isolation tester / high voltage ohm meter for this). Check the voltage when the compressor is running. If the voltage drop significantly when the compressor starts/runs, you have a bad connection somewhere. [pdf]

Kaishan screw air compressor does not pressurize

Firstly, check the pressure before and after the separation of the Kaishan air compressor, as well as whether there is any air leakage in the manual valve and the regulating solenoid valve 2SV; Then check for leaks in the gas pipeline, whether all butterfly valves are open, whether the intake regulator is working properly, whether solenoid valves 3SV and 8SV are leaking, and whether the pressure switch IPS needs to be readjusted. [pdf]