MARINE INSPECTION SERVICES AMP SURVEYS WORLD LEADING
Marine fresh water screw air compressor high temperature
The air below the deck is typically hot, humid and saline. It’s not a friendly environment, and your compressor’s build quality needs to reflect this. The process starts with the compressor sucking in air from the surroundings. It enters the air end, which houses the screws. Oil is injected, acting as a lubricant. . The screws push the air into an oil separator receiver. This unit consists of two stages: 1. High-efficiency cyclone separator 2. Oil. . Having passed through the filter, the air is ready for some cooling. The non-return discharge valve, which only opens at a minimum positive pressure, lets the air through in appropriate measures. To cool down the compressed air to a level that will be acceptable for. . A marine air compressor needs a proper water separator. By proper, we mean a cyclone separator with level-controlled drainage. The conventional approach is to use a solenoid valve on a timer. It opens up on regular intervals, causing pressure from the compressor. [pdf]
Drilling rig inspection
The General Mud system inspection checklist includes the following: High-Pressure Mud System, General Mud Pumps, Other High-Pressure Equipment, Low-Pressure Mud System, Mud Tank System, Solids Remo. . Accommodation & storage checklist includes: General, Offices, Living Quarters, Galley, Medical, General, Main Deck, Helideck,. [pdf]FAQS about Drilling rig inspection
What is a rig inspection?
Rig inspections, also known as rig audits, are conducted on drilling assets for both drilling contractors and drilling operators to assess the condition of an asset. Rig inspections are conducted to industry standards, such as API, as well as to specific client requirements.
What is included in a drill rig inspection checklist?
Drilling Rig Rotating Equipment Inspection Checklist, which includes the following: Rotary Table (Rt), Driller Control Instruments (DCIS) (Check also Driller Job Descriptions), Iron Roughneck Ir, Pipe Spinner Ps (If Applicable), Drill String Components (Tested As Per Api Rpg), Other Drilling Equipment, Top Drive.
Who conducts rig inspections?
Rig inspections can be conducted by either the owner or operator of a drilling asset. Services for rig commissioning are conducted prior to the equipment entering service. This can be at the end of construction or during major overhauls and five-yearly inspections.
What is rig inspection & rig commissioning?
Rig inspection and rig commissioning are critical to the oil and gas industry. Rig inspections can be carried out both before the hiring of a drilling asset and during the contract. A pre-hire rig inspection/audit assess the condition and suitability of the asset for a drilling contract.
What inspections do drilling rigs undergo?
At the commissioning stage, drilling rigs undergo inspections for acceptance. These usually include inspections of critical systems such as the prime movers that produce energy for the rig, rig floor testing, blowout prevention control systems review, stack acceptance pressure tests, and many other detailed audits.
When should rig inspections be carried out?
Rig inspections can be carried out both before the hiring of a drilling asset and during the contract. A pre-hire rig inspection/audit assess the condition and suitability of the asset for a drilling contract. During the contract, rig inspections assess both the asset’s operational condition and its compliance with the terms of the contract.
