Check for correct oil level at the ll plug location on the compressor. The oil level is full when oil is at the bottom of the threads in the ll plug hole. Check for oil purging from the air dryer. Refer to the image below as an example.
[pdf] These electric air compressors permanently mount to the bed of a service truck for ready access to compressed air for tire inflation or for powering air tools. They are powered by a DC battery for low-noise and exhaust-free operation.
[pdf] The analysis of the cause of the failure and the solution are as follows: (1) Whether the condensed water discharged from the trap has a large oil content, if so, check the leakage point in the unit and eliminate it, check whether the oil level of the compressor is too high, if so, reduce the oil level; (2 ) Whether the opening pressure of the minimum pressure valve is normal, if so, troubleshoot, and it is necessary to replace the valve; check whether the oil return pipe is blocked, if so, clean or replace the oil return pipe: (3) Replace the oil separator core.
[pdf] 
