A flow line, used on a drilling rig, is a large diameter pipe (typically a section of casing) that is connected to the bell nipple (under the drill floor) and extends to the possum belly (on the mud tanks) and acts as a return line (for the drilling fluid as it comes out of the hole), to the mud. .
The is used to slow the flow of returning before it hits the . This enables the shale shaker to clean the. .
A stinger line is similar to a flow line, but unlike a flow line is not used to maintain circulation. The stinger line is attached to the .
Another common add on is the sample box. This is a heavy duty rubber hose that is inserted at the end of the flow line and at the other end emplaced into the sample box itself. The.
[pdf] An enlarged pipe at the top of a casing string that serves as a funnel to guide drilling tools into the top of a well. The bell nipple is usually fitted with a side outlet to permit drilling fluids to flow back to the surface mud treating equipment through another inclined pipe called a flowline.
[pdf] 
Before we drill any boreholes, it is recommended that checks are made to see if planning consent is required from your local planning authority. In the majority of cases, planning consent will already exist under permitted development provisions. Sometimes however, local restrictions may apply if, for example,. .
(Images left to right: Compressor, Drilling Rig) When the drilling team arrives, they will be in one or two crew vehicles, the drilling rig will arrive. .
(Image: Water coming from borehole) We require and use water during the drilling process (we do need you to have a good water supply for our use), we will almost always hit water whilst drilling at some point / depth. The volumes involved can be considerable, as. .
(Images from left to right: Manifold chamber, trench system between boreholes, finished borehole with pipes running into trench) Once the boreholes are completed, the geothermal loops / probes have been inserted and the boreholes packed to. .
(Image: Sump filled with spoil) In addition to water, the drilling will produce a wet aggregate of broken rock and soil from the borehole – generally about 1.5 tonnes of aggregate per 100m of depth. Unless otherwise stated, disposal of this spoil is the responsibility of.
[pdf] 
