A drilling riser is a conduit that provides a temporary extension of a to a surface drilling facility. Drilling risers are categorised into two types: marine drilling risers used with subsea (BOP) and generally used by floating drilling vessels; and tie-back drilling risers used with a surface BOP and generally deployed from or very stable floating platfor.
[pdf] The air below the deck is typically hot, humid and saline. It’s not a friendly environment, and your compressor’s build quality needs to reflect this. The process starts with the compressor sucking in air from the surroundings. It enters the air end, which houses the screws. Oil is injected, acting as a lubricant. .
The screws push the air into an oil separator receiver. This unit consists of two stages: 1. High-efficiency cyclone separator 2. Oil. .
Having passed through the filter, the air is ready for some cooling. The non-return discharge valve, which only opens at a minimum positive pressure, lets the air through in appropriate measures. To cool down the compressed air to a level that will be acceptable for. .
A marine air compressor needs a proper water separator. By proper, we mean a cyclone separator with level-controlled drainage. The conventional approach is to use a solenoid valve on a timer. It opens up on regular intervals, causing pressure from the compressor.
[pdf] Less than an hour from downtown Houston, the world’s petroleum capital, the Offshore Energy Center (OEC) operates its facility, the Ocean Star. This totally unique museum and learning center is located on Galveston’s Pier 19, at Harborside Drive and.
[pdf] 
