This article lists the main components of a onshore . rigs have similar elements, but are configured with a number of different drilling systems to suit drilling in the marine environment. The equipment associated with a rig is to some extent dependent on the type of rig but typically includes at least some of the items listed below.
[pdf] 
Before we drill any boreholes, it is recommended that checks are made to see if planning consent is required from your local planning authority. In the majority of cases, planning consent will already exist under permitted development provisions. Sometimes however, local restrictions may apply if, for example,. .
(Images left to right: Compressor, Drilling Rig) When the drilling team arrives, they will be in one or two crew vehicles, the drilling rig will arrive. .
(Image: Water coming from borehole) We require and use water during the drilling process (we do need you to have a good water supply for our use), we will almost always hit water whilst drilling at some point / depth. The volumes involved can be considerable, as. .
(Images from left to right: Manifold chamber, trench system between boreholes, finished borehole with pipes running into trench) Once the boreholes are completed, the geothermal loops / probes have been inserted and the boreholes packed to. .
(Image: Sump filled with spoil) In addition to water, the drilling will produce a wet aggregate of broken rock and soil from the borehole – generally about 1.5 tonnes of aggregate per 100m of depth. Unless otherwise stated, disposal of this spoil is the responsibility of.
[pdf] • (#22) is a section of large diameter pipe fitted to the top of the that the attaches to via a side outlet, to allow the to flow back to the .• (BOPs) (#23 and #24) are devices installed at the wellhead to prevent fluids and gases from unintentionally escaping from the . #23 is the annular (often referred to as Hydril named after a manufacturer), and #24 is the pipe rams and blind rams.
[pdf] 
